Basic Info.
Digital LCD Module Type
Metering Module
DOT-Matrix Graphic LCD Module Type
Row/Column-Driven
LCD Drive Mode
Static Drive LCD Module
Customized
Non-Customized
Transport Package
Original Package
Product Description
1 Introduction
The M150GNN2 R3 is a Color Active Matrix Liquid Crystal Display with a back light system. The matrix uses a-Si Thin Film Transistor as a switching device.This TFT LCD has a 15.0 inch diagonally measured active display area with XGA resolution (1,024 horizontal by 768 vertical pixels array).
2 Features
Supported XGA Resolution
LVDS Interface
Compatible with RoHS Standard
3 Product Summary
Product Name | M150GNN2 R3 15" Lcd Display For Injection Molding Machine |
Model | M150GNN2 R3 |
Size | 15inch |
Resolution | 1024*768 |
Brightness | 420nits |
Contrast Ratio | 800:1 |
View Angle(L/R/U/D) | 80/80/80/80 |
Response Time | 16ms |
Optical mode | TN |
Operating Temperature | -10-65° |
Storage Temperature | -20-70° |
Interface | LVDS/8-bit |
Lamp type | LED |
LED Life Time | 30,000Hours |
Active Area | 304.13*228.10mm |
Outline Dimension | 326.50*253.50*12.00 |
Pixel Pitch | 0.2970 x 0.2970 |
Pixel Arrangement | R.G.B. Vertical Stripe |
Display Mode | Normally White |
Input Voltage | 3.3V |
Power Consumption | 8.8W |
Weight | 1200 |
Support Color | 16.2 M |
NTSC | 70% |
Viewing Direction | 6 O'clock |
Surface Treatment | AG+3H |
Authentication | ROSH/UL |
The following parts are optional. If you need them, welcome to make an inquiry,I will give you best price.
4 Signal Connector Pin Assignment
Pin No. | Symbol | Description |
1 | VDD | Power Supply, 3.3V (typical) |
2 | VDD | Power Supply, 3.3V (typical) |
3 | VSS | Ground |
4 | REV | Reverse Scan selection |
5 | Rin1- | -LVDS differential data input (R0-R5,G0) |
6 | Rin1+ | +LVDS differential data input (R0-R5,G0) |
7 | VSS | Ground |
8 | Rin2- | -LVDS differential data input (G1-G5,B0-B1) |
9 | Rin2+ | +LVDS differential data input (G1-G5,B0-B1) |
10 | VSS | Ground |
11 | Rin3- | -LVDS differential data input (B2-B5,HS,VS,DE) |
12 | Rin3+ | +LVDS differential data input (B2-B5,HS,VS,DE) |
13 | VSS | Ground |
14 | CIkIN- | -LVDS differential clock input |
15 | CIkIN+ | +LVDS differential clock input |
16 | GND | Ground |
17 | Rin4- | -LVDS differential data input (R6-R7,G6-G7,B6-B7) |
18 | Rin4+ | +LVDS differential data input (R6-R7,G6-G7,B6-B7) |
19 | VSS | Ground |
20 | NC | Not Connect |
Note: I REV = LOW/NC (0≤REV≤0.8V)
5 LED Connector Name/Designation
Item | Description |
Connector Name/Designation | LED Driver Connector |
Manufacturer | STM or compatible |
Connector Model Number | MSB24038P5A or compatible |
Mating Model Number | P24038P5A or compatible |
6 Connector Pin Assignment
Pin No. | Symbol | Description |
1 | VLED | 12V |
2 | GND | GND |
3 | Enable | 5V-On / 0V-Off |
4 | Dimming | PWM Dimming |
5 | NC | NC |
7 Input Power Specifications
Parameter | Symbol | Min | Typ | Max | Unit | Note |
System Power Supply |
LCD Drive Voltage (Logic) | VDD | 3.0 | 3.3 | 3.6 | V | (1)(2) |
VDD Current | Black Pattern | IDD | - | - | 0.394 | A | (1)(4) |
VDD Power Consumption | Black Pattern | PDD | - | - | 1.3 | W |
Rush Current | IRush | - | - | 3 | A | (1)(5) |
Allowable Logic/LCD Drive Ripple Voltage | VVDD-RP | - | - | 200 | mV | (1) |
LED Power Supply |
LED Input Voltage | VLED | 10.8 | 12 | 12.6 | V | (1)(2) |
LED Power Consumption | PLED | - | - | 7.5 | W | (1)(5) |
LED Forward Voltage | VF | 2.8 | - | 3.6 | V | (1)(2) |
LED Forward Current | IF | - | 60 | - | mA |
PWM Signal Voltage | High | VPWM | 3.3 | 5 | 5.5 | V |
Low | - | - | 0.8 |
LED Enable Voltage | High | VLED_EN | 2.0 | 5.0 | 5.5 |
Low | - | - | 0.8 |
Input PWM Frequency | FPWM | 200 | - | 20K | Hz | (1)(2)(6) |
Duty Ratio | PWM | 5 | - | 100 | % | (1)(7) |
LED Life Time | LT | 30000 | - | - | Hours | (1)(8) |
Note (1) All of the specifications are guaranteed under normal conditions. Normal conditions are defined as follow: Temperature: 25ºC, Humidity: 55± 10%RH.
Note (2) All of the absolute maximum ratings specified in the table, if exceeded, may cause faulty operation or unrecoverable damage. It is recommended to follow the typical value.
Note (3) The specified VDD current and power consumption are measured under the VDD = 3.3 V, FV = 60 Hz condition and Black pattern.
Note (4) The figures below is the measuring condition of VDD. Rush current can be measured when TRUSH is 0.5 ms.
Note (5) The power consumption of LED Driver are under the VLED = 12.0V, Dimming of Max luminance.
Note (6) Although acceptable range as defined, the dimming ratio is not effective at all conditions. The PWM frequency should be fixed and stable for more consistent luminance control at any specific level desired.
Note (7) The operation of LED Driver below minimum dimming ratio may cause flickering or reliability issue.
Note (8) The life time is determined as the sum of the lighting time till the luminance of LCD at the typical LED current reducing to 50% of the minimum value under normal operating condition.
Address:
No. 26 Ningxiang Road, Guangde Economic Development Zone, Anhui Province, Xuancheng, Anhui, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Computer Products, Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Established in 2004, Dingwei Optoelectronics Co., Ltd. Is a one-stop solution provider specialized in R&D, production and sales of customized touch display modules and standard products officially authorized by IVO. Our products are widely used in industrial control, automotive, medical, smart home, POS, instrumentation, human-computer interaction and other information terminals.
With a total area of 52, 000 m2 factory located in Guangde, Anhui Province, we′re committed to build a top-level R&D team formed by senior professionals from the LCM PANEL factory. Meanwhile, we regard the excellent quality of products as the lifeblood of the enterprise as well as establishing a set of scientific and rigorous quality management system. Survival by quality, development by innovation, and efficiency by management are the business objectives and policies that all staff and administrators of the company has been assiduously pursuing.