Ivo M121gns3 R0 Lvds 800X600 400 CD/M2 12.1 Inch LCD Panel for Vet Monitor

1 Introduction

The M121GNS3 R0 is a Color Active Matrix Liquid Crystal Display with a back light system. The matrix uses a-Si Thin Film Transistor as a switching device. This TFT LCD has a 12.1 inch diagonally measured active display area with SVGA resolution (800 horizontal by 600 vertical pixels array).

2 Features

Supported SVGA Resolution

LVDS Interface

Compatible with RoHS Standard

3 Product Summary

The following parts are optional. If you need them, welcome to make an inquiry,I will give you best price.

5 Definition of Viewing Angle

6 LED Connector Pin Assignment 

7 Signal Connector Pin Assignment

Note (1) L/NC:(0~0.4)V;H:(3~3.6)V

8 Power Sequencing Requirements

Note (1) All of the specifications are guaranteed under normal conditions. Normal conditions are defined as follow: Temperature: 25ºC, Humidity: 55± 10%RH.

Note (2) All of the absolute maximum ratings specified in the table, if exceeded, may cause faulty operation or unrecoverable damage .It is recommended to follow the typical value.

Note (3) The specified VCC current and power consumption are measured under the VCC = (3.3) V, FV= (60) Hz condition and Black pattern.

Note (4) The figures below is the measuring condition of VCC. Rush current can be measured when TRUSH is 0.5 ms.

Note (5) The power consumption of LED Driver are under the VLED = (12) V, Dimming of Max luminance.

Note (6) Although acceptable range as defined, the dimming ratio is not effective at all conditions. The PWM frequency should be fixed and stable for more consistent luminance control at any specific level desired.

Note (7) The operation of LED Driver below minimum dimming ratio may cause flickering or reliability issue.

Note (8) The life time is determined as the sum of the lighting time till the luminance of LCD at the typical LED current reducing to 50% of the minimum value under normal operating condition.