Basic Info.
Usage
Small-sized LCM, Notebook LCM
Digital LCD Module Type
Metering Module
DOT-Matrix Graphic LCD Module Type
Row/Column-Driven
LCD Drive Mode
Static Drive LCD Module
Customized
Non-Customized
Transport Package
Original Package
Product Description
1 Introduction
The M101GWT9 RA is a Color Active Matrix Liquid Crystal Display with a back light system. The matrix uses a-Si Thin Film Transistor as a switching device. This TFT LCD has a 10.1 inch diagonally measured active display area with WSVGA resolution (1,024 horizontal by 600 vertical pixels array)
2 Features
Supported WSVGA Resolution
LVDS Interface
Compatible with RoHS Standard
3 Product Summary Items
Model | M101GWT9 RA |
Size | 10.1inch |
Resolution | 1024*600 |
Brightness(nits) | 1000 |
Contrast Ratio | 600:1 |
| View Angle(L/R/U/D) | 70/70/70/70 |
| Response Time(ms) | 25ms |
| Optical mode | TN |
| Operating Temperature | -20°-70° |
| Storage Temperature | -30°-80° |
| Interface | LVDS/8-bit |
| Lamp type | LED |
| LED Life Time(Hrs) | 40,000Hours |
| Active Area(mm,H*V) | 222.72 x 125.28 |
| Outline Dimension | 238.6x148.05x6.5 |
| Pixel Pitch (H x V) | 0.2175 x 0.2088mm |
| Input Voltage | 3.3V |
| Power consumption | 8.143W |
| Weight | 330g |
| Support Color | 16.7 M |
| NTSC | 50%(Typ.) |
| Surface Treatment | Anti-glare |
Authentication | ROSH/UL |
The following parts are optional. If you need them, welcome to make an inquiry,I will give you best price.
4 Signal Connector Type
| Item | Description |
| Mating Receptacle/Type (Reference) | Hirose FH52-40S-0.5SH |
5 Signal Connector Pin Assignment
| Pin # | Signal Name | Description |
| 1 | SCL | I2C-Compatible Serial-Clock Input of Digital Vcom |
| 2 | SHLR | Horizontal scan direction control. "H" left to right; "L" right to left |
| 3 | UPDN | Vertical scan direction control. "H" down to up; "L" up to down |
| 4 | VDD | Digital power supply voltage |
| 5 | GND | Digital Ground |
| 6 | GRB | Global reset pin. (Low active) |
| 7 | SDA | I2C-Compatible Serial-Data Input/output of Digital Vcom Note2 |
| 8 | GND | Digital Ground |
| 9 | CLKP | Positive LVDS differential clock input |
| 10 | CLKN | Negative LVDS differential clock input |
| 11 | GND | Digital Ground |
| 12 | PIND0 | Positive LVDS differential input |
| 13 | NIND0 | Negative LVDS differential input |
| 14 | GND | Digital Ground |
| 15 | PIND1 | Positive LVDS differential input |
| 16 | NIND1 | Negative LVDS differential input |
| 17 | GND | Digital Ground |
| 18 | PIND2 | Positive LVDS differential input |
| 19 | NIND2 | Negative LVDS differential input |
| 20 | GND | Digital Ground |
| 21 | PIND3 | Positive LVDS differential input |
| 22 | NIND3 | Negative LVDS differential input |
| 23 | GND | Digital ground |
| 24 | GND | Digital ground |
| 25 | VDD | Digital power supply voltage |
| 26 | VDD | Digital power supply voltage |
| 27 | GND | Digital ground |
| 28 | NC | Dummy |
| 29 | VDDA | Analog power supply voltage |
| 30 | VDDA | Analog power supply voltage |
| 31 | VDDA | Analog power supply voltage |
| 32 | VDDA | Power Supply for LED Driver |
| 33 | VDDA | Analog power supply voltage |
| 34 | NC | Dummy |
| 35 | GNDA | Analog Ground |
| 36 | GNDA | Analog Ground |
| 37 | GNDA | Analog Ground |
| 38 | GNDA | Analog Ground |
| 39 | GNDA | Analog Ground |
| 40 | NBIST | Normal operation/BIST pattern select. Normally pull low.
When BIST=H: BIST. (CLK input is not needed.)
When BIST=L: Normal operation. (Default)
Suggest Connecting to GND if not used |
5 Input Power Specifications
| Parameter | Symbol | Min | Typ | Max | Unit | Note |
| System Power Supply |
| Power Supply Input Voltage | VDD | 3.0 | 3.3 | 3.6 | V | (1)(2) |
| VDDA | 3.0 | 3.3 | 3.6 | V |
Power
Supply Input
Current | Black
Pattern | IDD | - | - | 25 | mA | (3)(1) |
Power
Consumption | Ptotal | - | - | 200 | mA |
Logic Input Signal High
Level Voltage | VIH | 3.0 | 3.3 | 3.6 | V | (1)(4) |
Logic Input Signal Low
Level Voltage | VIL | - | - | 0.5 | V |
| Differential Impedance | Zm | 90 | 100 | 110 | Ω | (5) |
| LED Power Supply |
| LED Input Voltage | VLED | 23.4 | - | 30.6 | V | (1)(2)(7) |
| LED Power Consumption | PLED | - | - | 7.4 | W |
| LED Forward Voltage | VF | 2.6 | - | 3.4 | V |
| LED Forward Current | IF | - | 80 | - | mA |
| LED Life Time | LT | 30000 | 40,000 | 50,000 | Hour | (3)(6) |
Note (1) All of the specifications are guaranteed under normal conditions. Normal conditions are defined as follow: Temperature: 25ºC, Humidity: 55± 10%RH.
Note (2) All of the absolute maximum ratings specified in the table, if exceeded, may cause faulty operation or unrecoverable damage. It is recommended to follow the typical value.
Note (3) The specified VDVDD current and power consumption are measured under the VDD = 3.3 V,FV= 60 Hz condition and Black Pattern.
Note (4) Logic input signal include SCL,SHLR,UPDN ,GRB ,SDA ,BIST .
Note (5)This impedance value is needed for proper display and measured from LVDS Tx to the mating connector.
Note (6) The life time is determined as the sum of the lighting time till the luminance of LCD at the typical LED current reducing to 50% of the minimum value under normal operating condition.
Note (7) Definition of VLED and PLED
6 Electrical & Environment Absolute Rating
| Item | Symbol | Min. | Max. | Unit | Note |
| LVDS Supply Voltage | VDD | -0.5 | 3.96 | V | (1)(2)(3)(4) |
| VDDA | -0.3 | 4 | V |
| Operating Temperature | Tgs | -30 | 85 | ºC |
| Storage Temperature | Ta | -40 | 90 | ºC |
Note (1) All the parameters specified in the table are absolute maximum rating values that may cause faulty operation or unrecoverable damage, if exceeded. It is recommended to follow the typical value.
Note (2) All the contents of electro-optical specifications and display fineness are guaranteed under Normal Conditions. All the display fineness should be inspected under normal conditions. Normal conditions are defined as follow: Temperature: 25ºC, Humidity: 55± 10%RH.
Note (3) Unpredictable results may occur when it was used in extreme conditions. Ta= Ambient Temperature, Tgs= Glass Surface Temperature. All the display fineness should be inspected under normal conditions.
Note (4) Temperature and relative humidity range are shown in the figure below. Wet bulb temperature should be lower than 57.8 ºC, and no condensation of water. Besides, protect the module from static electricit.
Address:
No. 26 Ningxiang Road, Guangde Economic Development Zone, Anhui Province, Xuancheng, Anhui, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Computer Products, Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Established in 2004, Dingwei Optoelectronics Co., Ltd. Is a one-stop solution provider specialized in R&D, production and sales of customized touch display modules and standard products officially authorized by IVO. Our products are widely used in industrial control, automotive, medical, smart home, POS, instrumentation, human-computer interaction and other information terminals.
With a total area of 52, 000 m2 factory located in Guangde, Anhui Province, we′re committed to build a top-level R&D team formed by senior professionals from the LCM PANEL factory. Meanwhile, we regard the excellent quality of products as the lifeblood of the enterprise as well as establishing a set of scientific and rigorous quality management system. Survival by quality, development by innovation, and efficiency by management are the business objectives and policies that all staff and administrators of the company has been assiduously pursuing.
){kind=link}